Deye RW-M6.14 LV LiFePO4 Battery 6.14kWh

The Deye RW-M6.1 LiFePO4 battery is the perfect high-quality battery for all your residential and commercial solar solutions.

Technical Data:

• Total Energy Capacity: 6.14kWh
• Energy available at 90% DOD: 5.5kWh
• Current Capacity: 120Ah
• Nominal Voltage: 51.2V to suit 48V Inverters, Min 43.2V, Max 57.6V
• Recommended Continuous Charge/Discharge Rate: 0.5C (3.05kW / 60A)
• Maximum Discharge Rate: 0.83C (5.1kW / 100A)
• Peak Discharge Rate: 1.25C (6kW / 120A) for 2 minutes @ 25 deg C.
• Service Life: >=6000 cycles @ 70% DOD (Depth of Discharge), ambient temperature 25 deg C +-2 deg C, 0.5C charge and discharge rates
• Weight: 58kg
• Dimensions: 460mm W x 720mm H x 143 mm D (160mm deep with wall mounting bracket fitted)
• Enclosure: IP65 rated
• DC Connection: Clip in pre-made cable connectors
• Control Interface:
  • CAN Bus and RS-485 (RJ45 Socket x 1) – for interfacing with compatible inverters and system controllers (the battery is fully compatible with all common CAN bus compatible brands)
  • CAN Bus (RJ45 x 2) – for the communication connection of parallel batteries up to thirty-two (32) units in total
  • USB port for firmware updating
• Protection: Internal electronic protection including overcurrent, cell under and over voltage, temperature out of range, weak cell detection, minimum SOC control, active voltage based charge current limiting.
  *do not short circuit or connect in reverse polarity!
• Human Interface: State of Charge Display (0 to 100% indicated by five green LED’s),  Run LED, Alarm LED,  Main On/Off Switch.

Features:

• Internal BMS providing protection functions and communication features
• Can start larger loads due to its high discharge current handling capability of 0.83C (5.1kW) and 0.5C (3.05kW) continuously
• This battery is compatible with most inverters on the market specifically with Deye inverters as well as Sunsynk inverters
• These batteries can be expanded up to 32 batteries in parallel
• Thin design with wall mounting in mind
• IP65 rated
• Automatic parallel battery set addressing, no DIP switches to ensure easy setup and installation
• 10-Year manufacturer’s warranty
• Support high discharge and charge power

Included:

• 1 x Deye RW-M6.1 battery module
• 2 x Wall mounting plate brackets
• 4 x M6 x 100mm stainless steel wall mounting bolt assemblies
• 6 x M6 x 10mm wall mounting plate mounting screws
• 4 x Fixed support brackets
• 1 x Earthing / Grounding wire
• 1 x 600mm red 70mm^2 battery cable with pre-terminated waterproof terminals
• 1 x 600mm black 70mm^2 battery cable with pre-terminated waterproof terminals
• 1 x RJ45 waterproof inter module communication cable
• 1 x User manual

Downloads:

• User Manual
• Data Sheet
• Connection schemes
• Installer and troubleshooting manual